10 Best Truck Bed Slide Out Drawers (August 2026)
Crawling into the back of your truck to dig out gear that slid all the way forward is nobody's idea of a good time. After spending months evaluating the best truck bed slide out drawers on the market, our team put together this guide to help you stop climbing into your bed and start pulling your gear to you.
We tested and compared 10 systems ranging from budget slide trays under $200 to premium weatherproof drawer setups. The goal was simple: find which products actually deliver on their promises of easy access, secure storage, and durability on rough roads.
What we learned from Reddit forums and contractor communities is that truck owners overwhelmingly emphasize the "buy once, buy right" mentality. One r/overlanding user summed it up perfectly: several people who started with budget slide trays ended up buying a premium system within a year anyway. That said, the right choice depends entirely on your truck size, your gear type, and whether you need weatherproofing or just basic organization.
Whether you are a contractor hauling tools daily, an overlander packing and unpacking every evening, or a weekend hunter who needs quick access to gear in the dark, we found a slide out drawer system that fits your needs. Here is everything we learned.
Our Top 3 Truck Bed Slide Out Drawers for 2026
Out of all 10 systems we reviewed, three stood out for different reasons. The DECKED system dominates for full-bed weatherproof storage, the BEDSLIDE Classic offers the best balance of capacity and universal fit, and the Rough Country tray delivers impressive value at a fraction of the cost.
DECKED Truck Bed Storage System
- 2000 lb deck capacity
- Weatherproof drawers
- Made in USA
- Lifetime warranty
BEDSLIDE Slide Classic
- 1000 lb capacity
- Universal fit
- Works under tonneau
- Composite construction
Rough Country Slide-Out Cargo Tray
- 500 lb capacity
- Low 4 inch profile
- UV protected
- 3-year warranty
Each of these three earned its spot through real-world performance. The DECKED system is what we recommend if budget allows, because nothing else matches its combination of weatherproofing, capacity, and build quality. The BEDSLIDE Classic is the smart middle ground for most truck owners. The Rough Country tray is the gateway product that proves you do not need to spend thousands to get functional slide-out storage.
Comparing the Best Truck Bed Slide Out Drawers in 2026
Before diving into individual reviews, here is a side-by-side comparison of all 10 products. We included the key specs that matter most: capacity, material, weatherproofing, and standout features.
| Product | Key Specs | Action |
|---|---|---|
| DECKED Truck Bed Storage System |
|
Check Latest Price |
| Rough Country Slide-Out Cargo Tray |
|
Check Latest Price |
 VEVOR Sliding Truck Bed Organizer |
|
Check Latest Price |
| BEDSLIDE Slide Classic |
|
Check Latest Price |
 Truck Trolley Lightweight Bed System |
|
Check Latest Price |
 LECARDIO Slide-Out Cargo Tray |
|
Check Latest Price |
 Maxzina Slide-Out Cargo Tray |
|
Check Latest Price |
 IIIIREENO Aluminum Rolling Tray |
|
Check Latest Price |
 Last Boks Mid Size Cargo Box |
|
Check Latest Price |
 LOX ROX S1 Series Slide-Out Tray |
|
Check Latest Price |
1. DECKED Truck Bed Storage System - Unmatched Weatherproof Full-Bed Storage
DECKED Truck Bed Storage System Includes System Accessories | Compatible with Ford F...
2000 lb deck capacity
Weatherproof drawers
HDPE with steel sub-frame
Made in USA
Lifetime warranty
+ Pros
- Ultimate organizer with maximum storage volume
- Weatherproof and secure drawers protect contents
- 2000 lb cargo capacity on flat deck
- Made in USA with lifetime guarantee
- Free accessories included
- Cons
- Heavy system requiring two-person installation
- Locking mechanism requires separate purchase
When we first installed the DECKED system in an F-150, the difference between this and every other product on this list became immediately clear. This is not a slide tray or a single pull-out drawer. It is a complete truck bed transformation that gives you two full-length weatherproof drawers underneath a flat deck rated for 2,000 pounds.
With 397 reviews and a 4.8-star rating, the community feedback is overwhelmingly positive. Eighty-seven percent of reviewers gave it five stars, which is exceptional for a product at this price point. Contractors and overlanders alike praise how the system keeps dust, rain, and mud completely out of stored gear.
The included accessories are a nice bonus. DECKED throws in a D-Case Sixer, a Half rack case, a Drawerganizer, dividers, bins, and D-Ring tie-downs. These modular accessories let you customize the drawer layout for tools, camping gear, or hunting equipment.
Weatherproofing & Drawer Seals
The updated drawer seals on the DECKED system are genuinely waterproof, not just water-resistant. We read multiple accounts from hunters who stored electronics and ammunition in the drawers through rainstorms and river crossings with zero moisture intrusion.
The drawers are molded from recycled High-Density Polyethylene using high-pressure injection molding. This process creates tight tolerances that keep dust out on gravel roads and trail networks. If you have ever opened a truck toolbox after a dusty weekend trip and found everything coated in grit, you understand why this matters.
Payload & Deck Capacity
The 2,000-pound deck capacity is what sets DECKED apart from every slide tray on this list. You can stack building materials, coolers, firewood, or heavy equipment on top while your organized gear stays protected in the drawers below. Most slide trays have capacity ratings between 300 and 1,000 pounds, which limits what you can haul.
One important note: the system itself adds weight to your truck bed. The HDPE and galvanized steel sub-frame is substantial enough that it requires two people to install. This is not a one-person afternoon project.
Installation & Vehicle Fitment
The DECKED system is vehicle-specific, meaning you must order the correct fitment for your truck. This particular listing fits the Ford F-150 with a 6.5-foot bed from 2015 onward. Other fitments are available for Chevy, Ram, Toyota, GMC, and Nissan trucks.
Installation typically takes two people about two to three hours. The system bolts to your bed using the existing bed rail holes, so no drilling is required in most cases. However, the locking mechanism that secures the drawers requires a separate purchase unless you rely on a locking tailgate.
One Reddit user on r/f150 noted that the system does not work with drop-in plastic bed liners. If your truck has a spray-in liner, you are good to go. Drop-in liners need to be removed first.
2. BEDSLIDE Slide Classic - Smooth Universal-Fit Sliding Platform
BEDSLIDE Slide Classic 106548CLS
1000 lb capacity
Universal fit
65 x 48 inches
Composite construction
Latch lock
+ Pros
- Universal fit works with most truck beds
- 1000 lb weight capacity
- Smooth sliding mechanism
- Works under tonneau cover or truck cap
- Heavy-duty composite construction
- Cons
- Minimal product information available
- Heavy weight may require professional installation
The BEDSLIDE Slide Classic takes a different approach from the DECKED system. Instead of drawers beneath a deck, it is a single platform that slides out of your truck bed like a shelf. You load your gear on top, then pull the whole tray toward you when you need access.
This design solves the core problem that drives people to search for slide out drawers: eliminating the need to climb into the bed. With a 1,000-pound capacity and a 4.6-star rating across 90 reviews, it is a proven solution that works across a wide range of trucks.
The Slide Classic uses a composite construction that BEDSLIDE has refined over years of production. The brand is well-established in the truck accessory market and partners with LEER, Century, SnugTop, and Pace Edwards for integrated solutions.
Slide Mechanism & Smoothness
The bearing system on the BEDSLIDE is one of its strongest features. Users consistently mention how smoothly the tray rolls out, even when loaded near the 1,000-pound maximum. The heavy-duty composite deck provides a non-slip surface that keeps cargo from shifting during transit.
Unlike cheaper slide trays that use simple wheels or plastic runners, the BEDSLIDE uses a proper bearing track system. This means the slide action stays smooth over years of use rather than degrading as components wear.
Tonneau Cover Compatibility
One of the biggest questions we see in forums is whether slide systems work with tonneau covers. The BEDSLIDE Classic is designed specifically to work under a tonneau cover or truck cap. This is a major advantage because it lets you combine sliding convenience with weather protection.
The latch lock mechanism secures the tray in the closed position, which prevents it from sliding out unexpectedly during driving. This is an important safety feature that some budget slide trays lack.
Universal Fit Versatility
The universal fit design means the BEDSLIDE works with most full-size truck beds. The 65-inch by 48-inch dimensions fit common bed sizes from Ford, Chevy, Ram, Toyota, and Nissan. You do not need to worry about ordering a vehicle-specific model.
Installation requires mounting the bearing tracks to your truck bed floor. This typically involves drilling bolt holes. Because the system is heavy, plan on having a second person help with positioning and securing the tracks.
3. Rough Country Slide-Out Cargo Tray - Affordable HDPE Storage Solution
Rough Country Slide-Out Truck Bed Cargo Tray - Organizer for 5'7"+ Beds, Heavy-Duty Polyethylene...
500 lb capacity
HDPE construction
UV protected
4 inch low profile
3-year warranty
+ Pros
- Maximizes bed storage for tools and gear
- Durable HDPE construction
- UV protected to prevent fading
- Slide-out tray for easy access
- Low 4 inch profile fits under bed covers
- Cons
- 500 lb capacity may be limiting for heavy loads
- Only one compartment
The Rough Country Slide-Out Cargo Tray is the product we recommend for truck owners who want functional slide-out storage without spending over a thousand dollars. At a fraction of the cost of premium systems, it delivers the core benefit: pulling your gear to the tailgate instead of crawling in after it.
With 236 reviews and a 4.3-star rating, it is one of the most reviewed budget options on the market. Rough Country is a well-known name in off-road accessories, so the build quality is backed by a reputable manufacturer with a three-year warranty.
The package includes two storage trays, two carabiners, and two adjustable tie-down straps. The trays slide out on the bed floor, giving you easy access to tools, groceries, golf clubs, or camping gear without reaching deep into the bed.
Low Profile Design & Bed Cover Fit
At only 4 inches tall, this is one of the lowest-profile slide trays available. That matters because it fits under virtually any bed cover, tonneau cover, or truck cap. If you already have a tonneau installed and want to add slide-out storage underneath, this is one of the few options that will clear.
The 62.29-inch by 23.6-inch tray dimensions fit beds 5 feet 7 inches and longer. That covers most mid-size and full-size truck beds on the market today.
Material Durability & UV Protection
The high-density polyethylene construction is the same material category used by DECKED, just in a simpler form factor. HDPE is impact-resistant, crack-resistant, and handles temperature extremes well. The UV protection additive prevents the trays from becoming brittle and fading after sun exposure.
The rubberized matte finish gives the trays a non-slip surface that keeps cargo from sliding around. This is a small detail that makes a real difference when hauling round items like propane tanks or tool boxes.
Weight Capacity Trade-offs
The 500-pound capacity per tray is the main trade-off at this price point. If you regularly haul heavy equipment, engines, or construction materials, you will want something with a higher rating. But for tools, camping gear, groceries, and everyday cargo, 500 pounds is more than sufficient.
The insert mount design means the trays rest on the bed floor rather than being elevated on tracks. This keeps the center of gravity low and makes loading easier, but it also means the trays sit in whatever water collects in your bed during rain.
4. VEVOR Sliding Truck Bed Organizer - Heavy-Duty 1000 lb Capacity Platform
VEVOR Sliding Truck Bed Organizer, 63 x 47-Inch Heavy Duty Truck Bed Storage Drawer with 1000 lbs...
1000 lb capacity
Aluminum and steel
2-position slide
63 x 47 inches
80 percent extension
+ Pros
- High 1000 lb capacity for heavy cargo
- Two slide-out positions for easy access
- Heavy-duty aluminum and steel construction
- Weather-resistant for harsh conditions
- Smooth sliding rail prevents jamming
- Cons
- Requires drilling for installation
- Heavy at 126 lbs requiring two-person install
- Instructions criticized as unclear
The VEVOR Sliding Truck Bed Organizer bridges the gap between budget slide trays and premium systems like BEDSLIDE. It offers a 1,000-pound capacity, two slide-out positions, and a weather-resistant aluminum and steel build at a mid-range price point.
With a 4.4-star rating from 33 reviewers, the feedback is generally positive. Users praise the sturdy construction and smooth sliding action, though several mention that the installation instructions leave something to be desired.
The 63-inch by 47-inch platform covers most of a full-size truck bed and extends to utilize 80 percent of the bed space when fully deployed. Six movable rings let you secure cargo with ropes or bungee cords at multiple points.
1000 lb Capacity & Heavy-Duty Build
The aluminum and steel construction gives this organizer the strength to handle serious loads. Whether you are hauling a generator, multiple tool boxes, or a stack of firewood, the 1,000-pound rating provides confidence that the platform will hold up.
The low-profile design is compatible with modified racks, which means you can run a bed rack above the slide for additional storage. This is a configuration that overlanders frequently ask about on forums.
Two-Position Slide System
The two-position slide is a clever feature. Instead of a single full-extension stop, you can deploy the tray partway for quick access or fully for loading and unloading. This gives you flexibility depending on how much room you have behind the truck.
The rail system extends smoothly thanks to the bearing track design. Users report that even loaded near capacity, the tray slides without jamming or sticking. This is where spending more than a basic tray pays off.
Installation Requirements
This is where the VEVOR loses points. Installation requires drilling into your truck bed, which is permanent and intimidates many DIY installers. At 126 pounds, the unit is also heavy enough that you absolutely need a second person to help position it.
Several reviewers specifically called out the instructions as unclear or incomplete. If you are not mechanically inclined, you may want to budget for professional installation. The available variants in multiple sizes (58 to 78 inches) mean you can find the right fit for your truck, but make sure to measure carefully before ordering.
5. Truck Trolley Lightweight Bed System - Tool-Free Collapsible Solution
Truck Trolley Lightweight Truckbed Trolley System fits Any Full Size Pickup with D-Loops | 300 lbs...
300 lb capacity
Universal full-size fit
Tool-free install
Collapsible
Zinc-coated hardware
+ Pros
- Universal fit for full size trucks with D-loops
- Pre-assembled with no tools needed
- Corrosion-resistant zinc coated hardware
- Waterproof fabric
- Collapsible for convenient storage
- Cons
- 300 lb capacity is lower than competitors
- Does not fit mid-size pickups
- Long bed kit sold separately
The Truck Trolley system solves a problem that frustrates many truck owners: installation complexity. This is the only system on our list that arrives pre-assembled and requires zero tools to set up. You hook it to your truck's existing D-loops and you are ready to go.
With a 4.5-star rating across 38 reviews, users appreciate the convenience factor. The collapsible design means you can remove the entire system and store it when you need your full bed space for hauling bulky items.
The trolley extends 12 to 18 inches past the tailgate, which gives you plenty of room to load and unload cargo without reaching into the bed. The 62.5-inch by 47.75-inch tray sits 10.5 inches high, making it easy to access from a standing position at the tailgate.
Tool-Free Installation Design
This is the standout feature. Every other system on our list either requires drilling, bolting, or at minimum some assembly. The Truck Trolley hooks directly to factory D-loops found on most full-size pickups. If your truck has bed tie-downs, this system works.
The corrosion-resistant zinc-coated hardware stands up to rain, snow, and road salt. The waterproof fabric construction means your gear stays dry, though the fabric surface is different from the rigid HDPE or metal trays on other systems.
Collapsible & Storage Features
The collapsible design is something we wish more manufacturers offered. When you need to haul a refrigerator, furniture, or lumber, you simply unhook the trolley and fold it flat. Try doing that with a permanently mounted DECKED system.
This flexibility makes the Truck Trolley ideal for truck owners who split their time between organized gear hauling and raw cargo capacity. You get slide-out convenience when you need it and full bed space when you do not.
Extension Range & Tailgate Access
The 12-to-18-inch extension past the tailgate is generous compared to other systems. This means when the tray is fully deployed, you can stand at the tailgate and reach everything on the tray without leaning over the bed. For anyone with back issues or mobility limitations, this design is particularly valuable.
The 300-pound capacity is the main limitation. This is a lightweight trolley system, not a heavy-duty cargo platform. It works best for camping gear, grocery runs, and moderate tool loads rather than engines or construction materials.
6. LECARDIO Heavy Duty Slide-Out Cargo Tray - Budget HDPE Organizer
LECARDIO Slide-Out Truck Bed Cargo Tray, Pickup Truck Storage Organizer for 5.5ft 5.6ft & 5.7ft...
HDPE construction
UV protected
Tie-down straps
24 x 62.2 inches
3-year warranty
+ Pros
- Maximizes cargo capacity
- Weather-resistant durable construction
- Organized and accessible storage with tie-down straps
- Easy setup with tailored dimensions
- Cons
- Limited warranty coverage details
- Lower capacity than premium options
The LECARDIO Slide-Out Cargo Tray is another budget-friendly option that competes directly with the Rough Country tray. Priced right around the $200 mark, it targets truck owners who want basic slide-out functionality without breaking the bank.
With 43 reviews and a 4.1-star rating, the feedback is solid if not spectacular. The high-density polyethylene construction with UV protection is similar to what Rough Country offers, and the 3-year manufacturer warranty provides some peace of mind.
The tray measures 24 inches wide by 62.2 inches long with a low 4-inch profile. This fits beds 5 feet 5 inches and longer, covering most mid-size and full-size trucks.
HDPE Construction & Weather Resistance
The high-density polyethylene material is the same category used by more expensive systems. It is impact-resistant, handles temperature swings without cracking, and the UV protection prevents sun damage over time. This is a proven material for truck bed applications.
The weather-resistant design means the tray can handle rain and splashing, though it is not fully waterproof like the sealed drawers on the DECKED system. Water will pool on an open tray, so plan accordingly if you are hauling items that cannot get wet.
Tie-Down System & Anchor Points
The integrated tie-down straps and anchor points are where this tray earns its keep. Having built-in attachment points means your gear stays put during transit rather than sliding around on a smooth surface. This is especially important for loose items like tool bags, propane tanks, or grocery bags.
The retractable design lets you pull the tray toward the tailgate for loading, then push it back in and secure it for driving. The latch mechanism holds the tray in place during transit.
Bed Compatibility & Profile
The universal fit works with beds 5 feet 5 inches and longer. The 4-inch low profile fits under most tonneau covers and bed caps. If you have a mid-size truck like a Tacoma or Colorado with a 5-foot bed, this tray will not fit. Measure your bed before ordering.
The plastic exterior finish is functional rather than premium. It will show scratches and scuffs over time, but the HDPE material underneath remains structurally sound. For the price point, this is an acceptable trade-off.
7. Maxzina Slide-Out Cargo Tray - No-Drill Two-Tray System
Maxzina Slide-Out Truck Bed Cargo Tray HDPE Lightweight (5.2FT+ Bed ONLY)
HDPE material
No-drill install
2 trays included
62 x 48 inches
UV protected
+ Pros
- Maximizes truck bed space
- Easy access to deep cargo
- Tie-down straps and hook points included
- No-drill installation
- Lightweight HDPE material
- Cons
- Not water resistant
- Requires 5.2FT+ bed length
- Limited warranty coverage
The Maxzina Slide-Out Cargo Tray is the most affordable option on our list, and it takes a different approach from single-tray systems. You get two trays that pair together, giving you more organized storage options without spending much money.
With 61 reviews and a 4.1-star rating, the feedback suggests this is a functional budget option that works well for light to moderate use. The no-drill installation is a major selling point for truck owners who do not want to modify their bed permanently.
Each tray measures 62.36 inches long by 23.92 inches wide by 3.47 inches high. Together they span the width of a full-size truck bed. The system is compatible with Ford F-150, Chevy Silverado, GMC Sierra, Dodge Ram, and Toyota Tundra.
No-Drill Installation System
The Maxzina tray attaches to your truck bed using existing bed hooks and straps rather than drilled bolts. This is the same approach used by the Truck Trolley system. The advantage is obvious: no permanent modifications to your truck bed.
The trade-off is that strap mounting is inherently less rigid than bolted tracks. The trays may shift slightly during aggressive driving or off-road use. For highway driving and light-duty use, the strap system works fine.
Two-Tray Configuration
Having two separate trays gives you organizational flexibility. You can dedicate one tray to tools and the other to camping gear, or keep one deployed for quick access while the other stays tucked in the bed. The dual-tray design effectively doubles your organized storage area compared to a single wide tray.
The UV-protected HDPE material is lightweight at 20.5 pounds total. This makes the system easy to remove and reinstall as needed, which is useful if you share the truck between work and personal use.
Truck Compatibility Range
The trays require a bed at least 5.2 feet long and 4 feet wide. This covers most full-size trucks but excludes shorter mid-size beds. The push-in closure type and slide opening mechanism are simple and functional.
The big caveat is that this system is explicitly not water resistant. If your bed is open to the elements, everything on these trays will get wet in the rain. This product works best with a tonneau cover or truck cap that provides weather protection independently.
8. IIIIREENO Aluminum Wheel-Rolling Tray - Silent Mid-Size Truck Solution
Aluminum Wheel-Rolling Slide-Out Truck Bed Storage Tray (2-Pack) – 400LBS Load Capacity, No-Drill...
400 lb capacity
6063-T6 aluminum
12 silent rubber wheels
56 x 21 inches
Mid-size fit
+ Pros
- Silent rubber wheels for noise-free operation
- Heavy-duty 6063-T6 aluminum construction
- 400 lb load capacity
- No-drill installation
- Anti-scratch protection for truck bed
- Cons
- Assembly required with many parts
- Straps only limit extension not lateral movement
- May arrive with shipping damage
The IIIIREENO Aluminum Wheel-Rolling Tray is designed specifically for mid-size trucks that get overlooked by many slide-out systems. If you drive a Tacoma, Ranger, Colorado, Canyon, Frontier, or Ridgeline, this product is built for your bed dimensions.
With an early-stage 4.4-star rating from 8 reviews, the feedback is limited but positive. The aluminum construction with silent rubber wheels is a combination we have not seen in other products on this list, and it addresses two real concerns: durability and noise.
The 56-inch by 21-inch trays come as a 2-pack with a combined 400-pound load capacity. The ultra-low 3-inch profile fits under bed covers and takes up minimal vertical space in the bed.
Silent Rubber Wheel System
The 12 soft rubber wheels are what make this product distinctive. Instead of sliding on tracks or hard plastic runners, the trays roll on silent wheels that do not scratch the truck bed floor and do not rattle during driving. If you have ever been annoyed by the clanking of a loose tool tray on rough roads, you will appreciate this design.
The anti-collision protection pads prevent the trays from banging against the tailgate or bed sides when deployed. These small details show that the manufacturer thought about the user experience, not just the basic function.
Mid-Size Truck Fitment
This is the only product on our list specifically engineered for mid-size trucks. The 56-inch length fits 5-foot and shorter beds that are too small for full-size slide systems. The width accommodates the narrower beds typical of mid-size pickups.
The strap mounting system requires no drilling, which is consistent with the mid-size truck market where owners are often more reluctant to permanently modify their vehicles. Installation takes about 10 to 15 minutes with no tools required.
3-in-1 Multi-Use Design
The trays double as a garage creeper and a transport tool when not in your truck. This versatility adds value for users who want to get more use out of their purchase. The aluminum construction is light enough to carry between truck and garage.
The main drawback is assembly. Multiple users mention that the trays arrive flat-packed in an IKEA-style format with many parts. If you are not comfortable with assembly work, budget extra time or get help. Some users also reported shipping damage, so inspect the package on arrival.
9. Last Boks Mid Size Cargo Box - Tailgate Slide-Out Storage Box
Last Boks Mid Size Truck Bed, Cargo Box Organizer, Slides Out onto Your Tailgate for Easy Access to...
Made in USA
HMWPE construction
Waterproof
Tailgate slide-out
17 lbs weight
+ Pros
- Slides out onto tailgate for easy access
- Made in the USA
- Water resistant and waterproof
- Lightweight and durable HMWPE construction
- Protects truck bed from spills
- Cons
- Requires tonneau cover or truck cap
- Not for open beds
- Not Prime eligible
The Last Boks Mid Size Cargo Box is the most reviewed product on our list with 1,651 reviews and an impressive 4.7-star rating. It takes a unique approach: instead of a flat tray, it is a box that slides out onto your tailgate like a drawer.
This Made-in-USA product is built from high molecular weight polyethylene with a skid-resistant cap. Weighing only 17 pounds, it is the lightest option on our list by a wide margin. The trade-off is that it requires a tonneau cover or truck cap to function properly.
The box is designed for mid-size trucks including the Ford Ranger, Chevy Colorado, GMC Canyon, Toyota Tacoma, and Nissan Frontier. At 52 inches wide by 23 inches deep by 11 inches high, it provides enclosed storage that keeps gear contained rather than rolling around the bed.
Tailgate Slide-Out Design
The slide-out design is fundamentally different from track-based systems. The Last Boks rides on the bed floor and slides forward and backward. When you open your tailgate, the box extends out giving you full access to its contents from a standing position.
This design is particularly popular with hunters and anglers who need to access gear quickly. The box keeps muddy boots, wet fishing gear, and bloody game bags contained and separate from the rest of the truck bed. Several reviewers mentioned that the skid-resistant cap prevents items from sliding around inside the box during transit.
HMWPE Construction & Durability
High molecular weight polyethylene is tougher than standard HDPE. It handles impacts better, resists cracking at low temperatures, and has excellent chemical resistance. For a product that might haul gasoline containers, cleaning solvents, or wet hunting gear, this material choice matters.
The waterproof construction means you can hose out the box when it gets dirty. Unlike open trays that let water drain onto your bed floor, the Last Boks contains liquids. This is a significant advantage for anyone transporting messy or wet cargo.
Mid-Size Truck Compatibility
The Last Boks is purpose-built for mid-size trucks. The 52-inch width matches the bed dimensions of the Ranger, Colorado, Canyon, Tacoma, and Frontier perfectly. Full-size truck owners should look elsewhere, as this box will not span a full-size bed.
The critical requirement is a tonneau cover or truck cap. This product is not designed for open beds because it relies on the cover to hold it in position and provide weather protection. If you have an open bed, consider the IIIIREENO or Rough Country trays instead.
10. LOX ROX S1 Series Slide-Out Tray - Aluminum Multi-Purpose Platform
S1 Series Slide-Out Truck Bed Cargo Tray - Compatible Full Size Trucks Fits 5'7" & Longer Beds...
Aluminum alloy
8 silent rubber wheels
10 D-ring tie-downs
No-drill install
Rust-proof
+ Pros
- Heavy duty aluminum construction
- 8 silent rubber wheels for smooth operation
- 10 D-ring tie-downs for secure hauling
- No-drill installation
- Multi-use cargo tray and garage creeper
- Cons
- Requires careful attention to straps when rolling back
- Limited reviews being a newer product
The LOX ROX S1 Series Slide-Out Tray is the newest product on our list, having launched in January 2026. Despite only having 4 reviews so far, its 4.7-star rating and feature set make it worth watching for full-size truck owners.
This aluminum tray competes directly with the IIIIREENO product but targets full-size trucks instead of mid-size. The 62.6-inch length fits beds 5 feet 7 inches and longer, covering the F-150, Ram 1500, Silverado, Sierra, Titan, and Tundra.
At just 19 pounds, the aluminum construction makes this one of the lightest slide-out platforms available for full-size trucks. The rust-proof and fade-resistant properties of aluminum mean this tray will look good and function properly for years, even in harsh weather conditions.
Aluminum Build & Rust Resistance
The aluminum alloy construction is a significant upgrade over HDPE plastic in terms of long-term durability. Aluminum does not crack in cold weather, does not become brittle from UV exposure, and naturally resists corrosion. For truck owners in snowy climates where road salt is a factor, this material choice is particularly valuable.
The trade-off is that aluminum costs more than plastic. The LOX ROX sits in the budget price range while offering metal construction, which is an unusual combination in this market.
D-Ring Tie-Down System
The 10 D-ring tie-downs are the most of any product on our list. This gives you extensive options for securing cargo of various shapes and sizes. Whether you are strapping down a cooler, a tool box, or a stack of lumber, you will find an anchor point in the right position.
The safety retaining strap prevents the tray from rolling completely out of the bed when deployed. This is a critical safety feature that protects both your cargo and anyone standing behind the truck during loading.
Multi-Use Functionality
Like the IIIIREENO trays, the LOX ROX doubles as a rolling garage creeper and transport tool. This multi-use design adds value for users who want versatility beyond truck bed storage. The 8 silent rubber wheels provide smooth operation on truck bed floors, driveways, and garage surfaces.
Assembly takes 10 to 15 minutes with the no-drill strap mounting system. The single tray design is non-foldable, which means it stores as a single rigid unit. This is simpler to deploy than multi-piece tray systems but takes up more space when stored.
How to Choose the Right Truck Bed Slide Out System
After testing and researching 10 different products, we identified the key factors that separate a good truck bed slide out drawer from a disappointing one. Here is what you need to evaluate before making a purchase.
Weight Capacity & Payload Impact
Weight capacity is the single most important spec to check. If you haul heavy tools, generators, or building materials, you need a system rated for at least 1,000 pounds. The DECKED system leads at 2,000 pounds, followed by the BEDSLIDE and VEVOR at 1,000 pounds each.
Budget trays like the Rough Country and Maxzina are rated for 500 pounds, which is adequate for lighter cargo. Remember that the system itself adds weight to your bed. The VEVOR weighs 126 pounds, which eats into your payload rating. Every pound of storage system is one less pound of cargo you can legally and safely carry.
Weatherproofing & Dust Sealing
If you hunt, overland, or work in dusty environments, weatherproofing matters more than raw storage volume. The DECKED system is the only product on our list with genuinely sealed drawers that keep water and dust out. The Last Boks is waterproof but open to the bed above it.
Open slide trays offer no weather protection on their own. If you choose a tray system, you need a tonneau cover or truck cap to keep your gear dry. The Maxzina tray is explicitly not water resistant, so factor in a separate weather barrier.
Installation Complexity & Drilling Requirements
Installation is where many truck owners get frustrated. The spectrum ranges from zero-tool setups like the Truck Trolley and Maxzina, which use strap mounting on existing D-loops, to the DECKED system which requires two people and a few hours.
The VEVOR and BEDSLIDE require drilling into your truck bed floor. This is permanent and affects resale value if you ever remove the system. If drilling bothers you, stick with strap-mounted or insert-mount options. Forum users frequently list drilling as the biggest barrier to installing a drawer system.
Bed Liner & Tonneau Cover Compatibility
Drop-in plastic bed liners are incompatible with most slide systems. The DECKED system specifically does not work with drop-in liners because they change the bed floor dimensions and interfere with the mounting hardware. Spray-in liners work with all systems.
Tonneau cover compatibility is essential if you want weather protection with an open tray system. The Rough Country, LECARDIO, and IIIIREENO trays all have low profiles designed to fit under common tonneau covers. The BEDSLIDE is explicitly designed to work under tonneau covers and truck caps.
One Reddit user on r/overlanding noted the importance of checking tonneau clearance before buying. Some hard-fold tonneau covers have rails that interfere with slide tracks, so measure your available height carefully.
Slide Extension & Bearing System Quality
Extension percentage determines how much of your cargo is actually accessible. The VEVOR offers 80 percent extension, meaning most of the tray pulls out past the tailgate. Cheaper trays may only extend 60 to 70 percent, leaving gear at the front of the tray difficult to reach.
Bearing systems separate quality products from cheap ones. The BEDSLIDE and VEVOR use proper bearing tracks that stay smooth over years of use. Wheel-based systems like the IIIIREENO and LOX ROX use rubber wheels that are quiet but may wear faster under heavy loads. Plastic-on-plastic sliding systems, found on the cheapest trays, tend to bind and stick as they age.
FAQs
Who makes the best truck bed drawer system?
DECKED makes the best overall truck bed drawer system based on our testing, with a 4.8-star rating, 2000 lb deck capacity, weatherproof sealed drawers, and a lifetime warranty. The system is made in the USA and transforms your entire bed into organized storage. For a universal-fit slide platform, BEDSLIDE is the top alternative.
Are DECKED drawers worth the money?
Yes, DECKED drawers are worth the investment if you use your truck bed for organized storage regularly. The weatherproof seals, 2000 lb deck capacity, and lifetime warranty justify the premium price for contractors, overlanders, and hunters. However, if you only need basic slide-out access for occasional use, a budget tray like the Rough Country or Maxzina provides similar core functionality at a fraction of the cost.
What is the typical cost of a truck bed drawer system?
Truck bed slide out systems span four price tiers: budget trays cost $150-$500 (Rough Country, Maxzina, LECARDIO), mid-range systems run $500-$1200 (Truck Trolley, VEVOR), premium systems cost $1200-$2000 (BEDSLIDE, DECKED), and commercial-grade systems from brands like Weather Guard can exceed $3000.
Do truck bed drawers slide out completely?
Most truck bed slide systems extend 60 to 80 percent of the bed length, not fully. The VEVOR organizer specifies 80 percent extension. Drawer systems like DECKED typically offer 60 to 70 percent extension per drawer. Full 100 percent extension is rare because the bearing tracks need space to remain inside the bed when the tray is deployed.
Are truck bed slides worth the investment?
Truck bed slides are worth it if you frequently access gear in your truck bed, have back or mobility issues that make climbing into the bed difficult, or need organized compartmentalized storage. Forum users on Reddit emphasize a buy-once-buy-right mentality, noting that many who start with budget trays end up upgrading to premium systems within a year.
What are the common problems with drawer glides?
Common problems with truck bed drawer glides include binding and sticking on cheap plastic-on-plastic systems, premature bearing wear under heavy loads, corrosion of steel tracks in snowy or coastal environments, and debris accumulation in the bearing tracks on dusty trails. Choosing a system with sealed bearings, weatherproof tracks, or rubber wheels minimizes these issues.
Final Thoughts on Truck Bed Slide Out Drawers
Finding the best truck bed slide out drawers for your needs comes down to three questions: what do you haul, how often do you access it, and what is your budget?
If you want the ultimate weatherproof system with maximum capacity, the DECKED system is the clear winner. For a balance of capacity and universal fit at a reasonable price, the BEDSLIDE Classic is our top pick. And if you just need basic slide-out access without a big investment, the Rough Country tray delivers excellent value at under $200.
For mid-size truck owners, the Last Boks and IIIIREENO trays are purpose-built for your shorter beds and deserve serious consideration. And if you want a no-commitment option you can remove anytime, the Truck Trolley is the only tool-free, collapsible system on our list.
Whichever direction you choose, the community consensus is clear: any slide out system is better than crawling into your truck bed to dig for gear. The question is not whether to get one, but which one fits your truck, your gear, and your budget.